Additional Installation Notes

Contents:

 

Digitizer Requirements

The correct operation of FitalyStamp depends highly on the precision of the digitizer.

If your device has been used extensively with Graffiti and the Graffiti area is worn out by this usage, you may experience mis-taps with FitalyStamp as the digitizer will produce incorrect tap coordinates. Note that the single taps required by FitalyStamp are different in nature from the moves required by Graffiti: More precision is required for single taps as the averaging effect of moving across several points is not available.

Consequently, the use of FitalyStamp may reveal preexisting digitizer problems that were previously unnoticed in Graffiti usage. In particular heavy usage of Graffiti may have damaged the center left area, causing problems around the letters d and i, where most Graffiti gestures start.

You can use tools such as TealEcho or the freeware Graffiti Aid by Chris Crawford to check the condition of the digitizer. (If a digitizer is faulty, these tools may show an irregular or spotty line when drawing a straight line.) Check also for the absence of the so-called tap bug and for possible cures. If these fail, the only way to fix this problem is to have the screen repaired.

If you are experiencing digitizer problems, try to use the Sure Mode which you can select in the Operation Mode panel of FitalySetup. While slightly slower, the sure mode is often able to compensate for mild digitizer defects and deliver a better precision. (On the other hand, if your digitizer is in perfect condition, the normal mode allows faster entry.)

On this subject, see also the article by Hannes Frischat "What to to about the tap bug" in the Fitaly FAQ.

 

Compatibility/Incompatibility

The current release of FitalyStamp3.prc, dated 2004-07-20, works with Palm OS version 4.

FitalyStamp works with essentially all applications. Known incompatibilities exist with the following applications:

Partial incompatibilities exist with the following applications:

  • TealEcho
— incompatibility with sliding
  • EVEdit
— incompatibility with the Graffiti echo feature
  • TextPlus
— incompatibility with the Graffiti echo feature

This list is based on the releases dated 2004-07-20 and may or may not apply to later releases.

 

Instruction for the Demo version

The demo version includes Adobe Acrobat pdf files with gray-scale versions of the FitalyStamp overlays. The available FitalyStamp models are shown below:

The corresponding pdf files are as follows:
TungstenFitalyStamp.pdf Clie188FitalyStamp.pdf
PalmVFitalyStamp.pdf Clie198FitalyStamp.pdf
m100FitalyStamp.pdf Palm3FitalyStamp.pdf
Samsung500FitalyStamp.pdf Kyocera7135FitalyStamp.pdf

You will need to open the pdf file that applies to your Palm handheld and print FitalyStamp. Before you print from Acrobat, make sure that you select Actual Size (100%) and deselect "Fit to page" and "Annotations" in the print dialog.

Then place the overlay on the Graffiti area with the top aligned on the top of the area and secure it by some method of your choice: For example, use scotch tape, print it on a mailing stamp, put a transparent foil on top, print on HP's restickable stickers or some equivalent. (One way to position a label is to print first on a full page and then affix your sticker to the page and print again.) You can also cut a larger frame and tuck some of it under the sides of the Palm organizer.

The vertical position of the FitalyStamp overlay is not too critical as you can adjust it from the Adjust Position dialog of FitalyStamp. Actually, you can go as high as the bottom of the application screen and some of you may want to use it that way. You will also be able to adjust for horizontal position (but not for a rotation).

For the Kyocera 7135 and the Samsung SPH-i500 smartphones, the Graffiti area is separate from the screen and FitalyStamps fit exactly within the area.


Read This First
User's Manual
Options and Advanced Features
Panel Reference
Character Reference
Additional Installation Notes
Fitaly Index
FitalyStamp License
FitalyLetris
Textware Solutions
Palm Fitaly Forum

Copyright © 1998-2004 Textware Solutions.